Allow 5cm extra around all the edges so you have room to create a neat edge. Ad pick from a variety of turf selections for low traffic or high traffic applications.

Drivable Grass Guideline for Drivable Turf Installation

Step 8 brush up and enjoy!

How to lay artificial grass over dirt. Do leave the unrolled fake turf for at least 2. Installing artificial grass over natural grass: Now turn the two sections over and check how they look on the upper side.

Today we are looking at whether you can put artificial grass on top of real grass and our answer is this… Using a shovel, clear the surface where your artificial grass will be placed. Carefully fold back down the artificial grass and make sure the connection is seamless.

Artificial grass should have a durable edge to butt up to, so if you haven’t already got one around the area you are planning to turf, then install a timber, concrete, brick or metal edging and ensure it is level. All of our turf is 100% made in the usa from start to finish. You must at that point expel all the existing dead vegetation from the soil so that it is indeed and uniform.

If you would like help laying artificial grass. In this first step, you have to prepare the area where you are planning to lay artificial grass. If you are using tubes/tubs or glue and jointing tape, do the same process but lay out the tape on the ground and gently apply the adhesive so that it spreads over the tape evenly.

You should remove all the real grass and weed from that area (if there is any kill it off first). This can include removing any existing grass, roots, mulch, pine needles or anything else that could impact the artificial grass over time. Level out the area by applying a layer of sand, and then tamp it to ensure the dirt and sand are firmly packed.

Fold the edges of both pieces back on themselves about 25cm to reveal the back of the grass and the stitch lines. Level the ground, break up clods, cut off roots and remove debris and pebbles. Remember to lay down a plastic membrane to prevent weeds from cutting through the artificial turf.

To lay artificial grass on dirt, start by removing any rocks, debris and weeds from the dirt. This will give a stable base for the installation of your synthetic turf. To get going with this phase, you can dig out the existing turf using a space or turf cutter.

Like you would with soil, install a protective barrier to the space to prevent any weeds from growing through. Well if you are looking for the best way to lay it to the best quality, then we can help you. Creases and wrinkles are natural, so don’t be alarmed.

Roll your artificial grass out onto the area to be turfed. Brush back your new artificial grass lawn so that the blades are standing upwards. When installing artificial grass on dirt or soil, you’ll need a subbase.

To avoid the edges of your artificial grass caving. You will then want to dig out the existing soil to up to 2 and a half inches in depth. Here is the step by step guide that will show the process of installing artificial grass on the soil.

Adding a layer of sand over your living grass can help with drainage and leveling, but even that is not going to give you the end result you can expect with a properly installed manufactured lawn. At this point, you need to bear in mind that your new artificial lawn will sit about half an. We have seen over recent years customers doing all sorts with artificial grass and seeking us for advice on how is best to lay their turf.

All of our turf is 100% made in the usa from start to finish. Ad pick from a variety of turf selections for low traffic or high traffic applications. Set the two pieces beside each other, pile upwards, and line up the edges.

The edges of the grass patch are the weakest parts of the turf. Put a bit of sand, grit, or stone on top of the membrane to keep it held down. Cut the membrane to shape before laying it out.

The bottom line the bottom line is that it is possible to put synthetic turf over an existing, natural lawn, but we do not recommend it.